1. This high temperature glass cloth tape is with imported glass cloth as the basic carrier, and coated with silicone adhesive.
2. It features excellent temperature resistance, good adhesion and tearing resistance etc.
1. Good stability, can work under 260°C for a long time, can withstand 260°C high temperature short time.
2. Soft, tear resistance, adhesive power is strong, not easy to deformation, suitable for all kinds of special-shaped material surface paste protection
3. No adhesive residue, high temperature for a long time after curing tear tape, leaving no residue.
4. High mechanical strength, suitable for coil are tightly wrapped;
Product application: transformer (especially high frequency modulator, microwave
180°Peeling Strength (N/25mm)
2~500 (custom slit)
Note: The above technical information and data should be considered representative or typical only and should not be used for specification purposes.
1. Permanent sealing of high temperature ducts or chambers
2. Applications requiring heat treatment followed by clean removal of the tape with little or no stain
3. Protect surfaces against abrasion
4. High temperature masking
5. Bundling, holding and wire harnessing
Product shelf life is 1 years from date of manufacture when stored at room temperature conditions (70°F [23°C] and 65% RH) in the products original packaging.
Width: Maximum width 38.58 inches (980mm. ) (Can be Customized)
Length: 30-50m (Can be customized. )