Description:
Mylar tape mylar polyester adhesive tape mylar insulation tape for transformer is used in powder coating, plating and anodizing industry to mask areas that do not require coating or plating. It will remove cleanly without leaving an adhesive residue.
Features:
* Good holding power
* Chemical resistance
* Flammability rating: 94V-0 has excellent resistance to solvents
* Polyester film tape with high temperature resistance
* High pressure resistance
* Good insulation performance and the characteristics of the flame retardant
Construction:
Data Sheet:
Item | FB2555MT | FB5080MT |
Carrier | Polyester Film | |
Adhesive | Acrylic | |
Filling | Halogen Free Pigment | |
Carrier Thickness | 0.025mm | 0.05mm |
Total Thickness | 0.055mm | 0.08mm |
Peel Strength Power | ≥44 N/10mm | ≥88 N/10mm |
180°Peeling Strength | ≥300 N/M | |
Elongation | ≥80% | ≥50% |
Dielectric Breakdown | ≥5.0KV | ≥6.5KV |
Heat Resistance | 150°C | |
Cold Resistance | ≤-10°C | |
Solvent Resistance | Ok | |
Flame Retardant | UL 510 |
Note: The above technical information and data should be considered representative or typical only and should not be used for specification purposes.
Applications:
* Transformers, motors, capacitors and other kinds of motors, electrical resistance of insulation bandaging, also known as polyester insulating tape.
* Can attached the connecting parts closely for excellent protection without movement
* Powder coating
* High temperature shielding
* Soldering