ESD Black Kapton Tape Polyimide Film Adhesive Tape For 3D Printer
Product Description
1)Introduction:
ESD Black Kapton Tape Polyimide Film Adhesive Tape For 3D Printer, black polyimide film as a substrate, coated on one side of high-performance silicone pressure-sensitive adhesive. There is single-sided Fluor plastic from composite materials with or without composite types of materials. Coating precision of ± 2.5um, no scratches, drawing, and other phenomena, good shear resistance, easy die-cutting excellent heat resistance and solvent resistance.
ESD Black Kapton Tape Polyimide Film Adhesive Tape For 3D Printer Features:
* High electrical strength
* Class H insulation
* High temperature resistance
* Strong adhesion
* Flexible and conformable
* Peeled off without leaving an adhesive residue
2) ESD Black Kapton Tape Polyimide Film Adhesive Tape Application:
ESD Black Kapton Tape Polyimide Film Adhesive Tape For 3D Printer, suitable for 3D printer, electronic circuit board wave soldering masking, electrical insulation and high-end finger protection, motor insulation, as well as lithium battery positive and negative and ears fixed. Now it is widely used in aviation, marine, spacecraft, missiles, rockets, atomic energy, electrical and electronic industry and other fields.
Data Sheet:
Item | FB2560KT-ESD |
Color | Black |
Carrier | Polyimide |
Adhesive | Silicone |
Carrier Thickness(mm) | 0.025 |
Total Thickness (mm) | 0.060 |
Tensile Strength(N/25mm) | 115 |
Adhesion (N/25mm) | 5.5 |
Elongation at Break (%) | 45 |
Corrosion Resistance | 1.0 |
Heat Resistance(°C) | 250 |
Electrical Strength (Volts) | 5000 |
Anti-static(Ω) | <1X108 |
Storage Condition | 20°C, 65RH |
RoHS certificate | Complied |
Length(m) | 33 |
Width(mm) | 2~500 |
Note: The above technical information and data should be considered representative or typical only and should not be used for specification purposes.